Why Does My Sprinkler Zone Keep Running?

Sprinkler valve box diagnosis in Grosse Pointe

Short answer: a zone that continues watering after the controller stops is usually a valve-side problem rather than a programming problem. Debris, a damaged diaphragm, a solenoid or bleed mechanism issue, or a valve that cannot close completely are common possibilities.

First determine whether the controller is still commanding the zone

Turn the station off at the controller. If the water continues, the diagnosis shifts toward the field valve or hydraulic side. If the controller is still sending output, investigate programming or controller behavior first.

Common causes of a sprinkler valve that will not shut off

Debris inside the valve, diaphragm damage, internal wear, a loose manual bleed, solenoid problems or pressure conditions can prevent complete closure. Replacing the controller will not repair a mechanically stuck valve.

Why diagnosis matters

A running zone can look like an electrical problem when it is hydraulic, while a zone that never starts can be controller, wire, solenoid, valve or water-supply related. Testing in order prevents unrelated parts from being replaced.

What should a homeowner do?

If water is running continuously and cannot be stopped at the controller, use the irrigation shutoff if you know where it is and can operate it safely. Avoid disassembling a pressurized valve if you are unsure of the system.

Grosse Pointe sprinkler valve diagnosis

Grosse Pointe Irrigation diagnoses established residential systems throughout the Pointes and St. Clair Shores. We test the command path and valve operation before recommending repair.

Learn about sprinkler valve repair or call/text (313) 992-9900.